TI250 Series
DC-to-AC Inverter
The highly efficient TI250 Series DC-to-AC Inverter produces 250 watts of power from an aircraft’s 28 VDC input. Engineered to run cooler and featuring a fanless design, the TI250 Series saves energy and reduces weight, making these inverters lighter and smaller than competing units. View all Inverters Buy Now
Features
- Supplies 250 watts of power
- Compact design — lighter and smaller than competing inverters
- Lightweight — 2.2 to 2.6 lbs
- 87 – 90% efficiency
- Input transient, overload, short-circuit protection — up to 150% of rated load without damage
- Ground fault interrupter (GFI) protection
- Remote On/Off
- Designed and built in Wichita, Kansas, USA
- Two-year limited warranty
- FAA TSO certified
Specifications
| Model Number | TI250 | TI254 | TI256 |
| Part Number | 6430250-1 | 6430250-2 | 6430250-3 |
| Input Voltage | 20 – 36 VDC | ||
| Input Current | 10A at 28 VDC input | ||
| Output Voltage | 115 VAC ± 3% | 115 VAC ± 3% | 115/26 VAC ± 3% |
| Output Power | 250 VA | ||
| Output Frequency | 60 Hz ± 0.1% | 400 Hz ± 0.1% | 400 Hz ± 0.1% |
| Output Waveform | Single phase, true sine wave, < 3% total harmonic distortion | ||
| Power Conversion Method | Current mode control | ||
| Weight | 2.2 lbs | 2.2 lbs | 2.6 lbs |
| Altitude | 70,000 ft | ||
| Humidity | Tested to greater than 95% for 10 days, temperature cycle of 100°F to 150°F | ||
| Temperature | –65°F to +160°F (-55°C to +70°C) | ||
| Mating Connector | MS3106A-18-9S (MCI P/N 9016905-1,-2) | ||
| Case | Anodized aluminum extrusion, blue | ||
| Certification | FAA TSO-C73 certified RTCA DO-160G qualified |
||
Downloads
Fliers and Brochures
TI250 Series Product Flier
Electrical Power Systems Brochure
Inverter Comparison Brochure
Commercial Aviation Brochure
Installation Manual
IM 9018067
Technical Drawing
OL 6430250
Related Products
Inverter Comparison Chart
